LaTeX Footnote Commands: Marks, Symbols and Captions
November 11, 2026 · 8 min read
LaTeX Footnote Commands: Numbering, Symbols, Marks and Captions
A LaTeX footnote takes one command: type \footnote{text} straight after the word it explains. LaTeX prints a superscript number at that spot and the note at the bottom of the page. The sections below cover split marks, reused numbers, symbols, resets and captions, each with its compiled output and the error it tends to throw.
How Do You Add a Footnote in LaTeX?
Put \footnote{...} directly after the word or punctuation mark, with no space before the backslash. A space there gets typeset, so the mark floats away from its word. The counter steps on its own, which is why footnotes in LaTeX never need manual numbering.
\documentclass{article}
\begin{document}
The first draft ran to 90 pages.\footnote{Archived in the project repository.}
Reviewers asked for cuts.\footnote{Two of the three reports.}
One note keeps a fixed number.\footnote[5]{Set by hand.}
The next note continues the count.\footnote{This one prints as 3.}
\end{document}
Compiled with pdflatex, the text shows superscripts 1, 2, 5 and 3. The notes sit at the page foot in that order, under a short horizontal rule. The optional [5] sets the printed number without stepping the counter, so the following note still gets 3. That behaviour is documented in the LaTeX2e reference for \footnote.
The error you'll meet most often here is a missing closing brace. \footnote reads its argument across paragraph breaks, so LaTeX keeps swallowing text and stops with File ended while scanning use of \@footnotetext. Count your braces from the backslash forward. Verbatim code is another trap, and our LaTeX inline code guide explains why \verb fails inside a footnote.
Splitting the Mark and the Text With \footnotemark and \footnotetext
Some places accept a mark but not a full note. Inside \fbox or \mbox, a plain \footnote prints its mark, but the note text never reaches the page foot, and LaTeX raises no error. \footnotemark prints the number and steps the counter, and \footnotetext adds the matching note later, outside the box.
\fbox{Boxed claim\footnotemark}
\footnotetext{Text for the boxed claim.}
Alpha\footnotemark{} and beta\footnotemark{} share a line.
\addtocounter{footnote}{-1}\footnotetext{Note for alpha.}
\stepcounter{footnote}\footnotetext{Note for beta.}
The box gets mark 1 and its note prints as 1. Alpha and beta get marks 2 and 3. Two marks in a row leave the counter at 3, and \footnotetext always uses the current value. That's why the example steps back one before the first text and forward again before the second. Drop both counter lines and both notes print as 3.
You can also pin numbers explicitly with \footnotemark[2] and \footnotetext[2]{...}. A tabular cell loses note text the same way a box does, so this pair is the usual workaround there too. The table in LaTeX guide also shows the threeparttable route for notes under the grid.
How Do You Refer to the Same Footnote Twice in LaTeX?
Put a \label inside the first note and point back to it with \footref. LaTeX prints the same number again without creating a second note. LaTeX News issue 33 records \footref joining the kernel in the 2021-06-01 release. Before that you needed footmisc or a class that defined it.
The survey ran in 2024.\footnote{Sample of 1,200 adults.\label{fn:panel}}
A different claim.\footnote{Unrelated source.}
The follow-up used the same panel.\footref{fn:panel}
This prints marks 1, 2 and 1, with only two notes at the foot. On the first compile you'll see ?? instead of the second 1, plus an undefined reference warning. Compile again and it resolves. In our test with TeX Live 2025 and hyperref loaded, the \footref mark became a clickable link to note 1. The hyperref setup itself is in our LaTeX hyperlink guide.
The older fallback is \footnotemark[1], a hard-coded number. We prefer \footref, because a hard-coded mark goes stale the moment you add a note above it. Whether you should repeat a note at all is a question for your style guide, not for LaTeX. For the Chicago and APA rules on reusing a note, see our guide to two footnotes for one sentence.
How Do You Put an Asterisk or Symbol on a LaTeX Footnote?
Switch the whole document to symbols with one preamble line: \renewcommand{\thefootnote}{\fnsymbol{footnote}}. LaTeX then marks notes in a fixed order of nine: * † ‡ § ¶ ‖ ** †† ‡‡. Note ten stops the build with LaTeX Error: Counter too large.
The cure is to keep the counter below ten. Reset it at each section, or number per page with footmisc, covered in the reset section below. Loading footmisc also swaps in a longer default symbol set that reaches 16, according to its documentation on CTAN.
For a single asterisk in an otherwise numbered document, wrap the change in a group and force symbol 1:
Normal claim.\footnote{One.}
Equal contribution.{\renewcommand{\thefootnote}{\fnsymbol{footnote}}\footnote[1]{Joint first authors.}}
Back to numbers.\footnote{This one prints as 2.}
The output reads 1, *, 2. Because the optional number doesn't step the counter, the asterisk costs nothing. For other styles, replace \fnsymbol with \alph, \Alph, \roman or \Roman.
Adding a Footnote Without a Number or Marker
On a title page, use \thanks inside \title or \author. It behaves like a footnote, and the standard classes mark it with symbols. Body numbering still starts at 1 after \maketitle.
For a note with no mark at all in the body, the Wikibooks LaTeX footnotes page gives this preamble macro:
\makeatletter
\def\blfootnote{\xdef\@thefnmark{}\@footnotetext}
\makeatother
Write \blfootnote{Presented at the 2026 workshop.} anywhere in the text. The note appears at the page foot with no mark, and the counter doesn't move. Leave out \makeatletter and the build fails with Use of \@ doesn't match its definition.
Resetting LaTeX Footnote Numbering by Chapter, Section or Page
Each class has its own default. The article class numbers notes continuously through the document. Report and book restart at 1 in every chapter, which we confirmed by compiling both.
\counterwithin*{footnote}{section} % restart at 1 in each section
\counterwithin{footnote}{section} % restart and print 1.1, 1.2, 2.1
\usepackage[perpage]{footmisc} % restart on every page
\counterwithin has been in the kernel since the 2018-04-01 release, so you no longer need the chngcntr package. The starred form resets without changing how the number looks. The perpage option needs at least two compile runs, because LaTeX only learns where pages break on the first pass. For a one-off restart, \setcounter{footnote}{0} does it manually.
How Do You Put a Footnote in a Figure Caption?
A caption is a moving argument, because its text also travels to the list of figures, and the fragile \footnote can't survive that trip. In our TeX Live 2025 test, \caption{Text\footnote{...}} stopped on the first compile with Argument of \@caption has an extra }, even without \listoffigures. Split the mark and the text instead.
\begin{figure}[ht]
\centering
\rule{4cm}{2cm}
\caption[Sales by region]{Sales by region\footnotemark}
\end{figure}
\footnotetext{Source: company filings.}
The optional short caption goes to the list of figures, so the mark never leaves the float. The note text sits in the main flow right after the figure. One limitation: floats move. If LaTeX pushes the figure to a later page, the note can stay behind, so check the PDF.
Section headings have the same problem and a shorter fix. \section[Results]{Results\footnote{Preliminary data.}} keeps the note out of the table of contents, as the LaTeX2e reference manual describes. footmisc's stable option is the alternative if you'd rather not repeat the title.
Turning Markdown Footnotes Into LaTeX Footnotes
If you draft in Markdown, Pandoc does the conversion for you. Each [^1] reference becomes a single \footnote{...} with the note text inlined at the call site. Our Markdown to LaTeX guide covers the full Pandoc command, and the Markdown footnotes syntax guide explains where [^1] renders. For citations that should land in footnotes, biblatex's \footcite and its verbose styles do the job. See Markdown citations for the Markdown side.
Our editor's preview doesn't render Markdown footnotes or LaTeX footnote commands, so compile the output in a TeX distribution to check them. The Markdown to LaTeX converter turns the rest of your document into a .tex file in the browser, but it doesn't compile a PDF. Use Pandoc for the footnotes themselves.
A LaTeX footnote comes down to a handful of commands: \footnote for the everyday case, \footnotemark with \footnotetext where a note can't go, and \footref to reuse a number. Add \fnsymbol or \counterwithin when the numbering needs to change. If you draft in Markdown, write the prose in the editor, convert it with the Markdown to LaTeX tool, then add the footnote commands to the .tex file and compile.