Microsoft Word Counter: Windows, Mac, Web and Mobile

November 11, 2026 · 9 min read

Microsoft Word Counter: Where to Find It on Every Version

The Microsoft Word counter sits in the status bar at the bottom left of the window and updates as you type. Click it, or open Review > Word Count, for characters, paragraphs and lines. Below are the steps for Windows, Mac, the web and phones, plus why two counts disagree and how to print the total in your file.

Where the Microsoft Word Counter Lives on Windows

Open any document in Word for Windows and look at the bottom left edge. You'll see something like 1,284 words next to the page number. Microsoft's Show word count help page says Word counts the words while you type, so the figure is always current.

Highlight a paragraph and the label changes to 212 of 1,284 words. The first number is your selection and the second is the full document. That's the quickest way to check one section against a limit.

For more than words, click the status bar figure or go to Review > Proofing > Word Count. A small dialog opens. Ctrl+Shift+G opens the same box on most Windows builds. It isn't on Microsoft's published shortcut list, so fall back to the ribbon if it does nothing.

Here's what the Windows dialog reports:

StatisticWhat it tells you
PagesPages at the current layout, margins and font
WordsThe same figure the status bar shows
Characters (no spaces)Letters, digits and punctuation only
Characters (with spaces)The figure above plus every space
ParagraphsBlocks of text ending in a paragraph mark
LinesLines as they wrap on the page right now

Below the numbers is a checkbox, Include textboxes, footnotes and endnotes. It changes the totals, so we come back to it further down.

How Do I Activate the Word Counter if It's Missing?

If the bottom bar shows page numbers but no words, the MS Word counter has been switched off in the status bar menu. Right-click anywhere on the status bar. A long list of optional items appears, each with a tick beside it when it's on.

Find Word Count and click it so it gets a tick. The figure should return straight away. Depending on your version, the same menu may also list a character count item. If yours has one, tick it to keep a running character total beside the words.

Word Count in Word for Mac

The Mac version works much like Windows. The count sits in the status bar along the bottom, and clicking it opens the Word Count box. Microsoft's help page lists characters, lines and paragraphs in that box alongside the word total.

To count part of a document, select the text first, then choose Tools > Word Count from the menu bar. With nothing selected, the box covers the whole file. You'll also find Word Count on the Review tab of the ribbon.

Microsoft doesn't document a Mac keyboard shortcut for this box, so stick with the menu. It's two clicks.

Word for the Web and the iPhone and Android Apps

Word in a browser counts as you type, just like the desktop app. If you can't see the figure at the bottom of the window, you're likely in reading view. Microsoft's instructions say to choose Edit Document > Edit in Word for the web, which switches to editing view and shows the count.

You can hide or show it on purpose too. Go to Review > Word Count and tick or clear Show Word Count. That's handy when a running number distracts you while drafting.

Phones are less clear. Microsoft's Word for iPhone features table marks word count as supported, and the Android app offers it as well. Microsoft doesn't publish a tap-by-tap path for either, though. Community answers point to the Review tab while you're editing, so start there. They also suggest typing word count into the app's Tell Me search, shown as a lightbulb icon.

Why Do Two Word Counts in the Same Document Disagree?

The usual culprit is that checkbox in the Windows dialog: Include textboxes, footnotes and endnotes. With it cleared, Word counts only the main body. With it ticked, a paper with 600 words of footnotes jumps by roughly that much.

Microsoft community answers report that the status bar follows whatever the dialog is set to. So if a colleague's count differs from yours on the same file, open the dialog on both machines and compare that tick first. Google Docs follows its own rules, and our guide to the Google Docs word count lists what it leaves out.

What Word won't do is leave out your reference list. There's no toggle for a bibliography, a title page or an appendix. To get a body-only figure, select from the first word of your introduction to the last word of your conclusion, then read the status bar's x of y label. That's Word's real weak spot here: it's manual, and you'll redo it after every edit. If the paper is in LaTeX instead, a LaTeX word counter like TeXcount leaves the bibliography out by default.

We prefer keeping the status bar count switched on and selecting the body before any final check. A single headline total hides both the footnote setting and the reference list.

Microsoft Word Character Counter: Spaces In or Out

Word gives you two character figures, and they answer different questions. Characters (with spaces) counts every letter, digit and punctuation mark, plus the spaces between words. Characters (no spaces) drops the spaces, so it's always smaller.

Which one matters depends on who set the limit. Online forms and portals usually count every character you type, spaces included. Some translation and publishing briefs quote characters without spaces. When a brief doesn't say, check against the larger figure. If you fit under that, you fit under both. Our character counter guide goes deeper on counting with and without spaces.

To check one field's worth of text, such as a 2,000-character personal statement, select just that passage and open the dialog. The character figures then cover the selection only. For the caps themselves, see our list of personal statement character limits for AMCAS, AACOMAS and UCAS.

Putting a Live Word Count Inside the Document

Some tutors and courts want the total printed on the page itself. Word does this with a field called NumWords, listed in Microsoft's field codes reference.

  1. Put the cursor where the number should appear, for example after Word count: on your cover page.
  2. Go to Insert > Quick Parts > Field.
  3. Pick NumWords from the field list and click OK.

You can also press Ctrl+F9 to insert empty field braces, type NUMWORDS between them, and press F9. With field codes showing (Alt+F9 toggles them), the line looks like this:

Word count: { NUMWORDS }

Once updated, the braces turn into a bare figure such as Word count: 1,284. The field returns only the number, which is why the label goes in front of it.

Two limits catch people out. The field doesn't refresh on its own: click it and press F9 on Windows, or right-click it and choose Update Field, before you submit. It also shows the whole-document total only, never a section. Microsoft community answers add that NumWords skips text boxes, footnotes and endnotes, so it can trail a status bar that includes them.

Counting a Markdown Draft Before It Reaches Word

If you write in Markdown and paste into Word later, count the clean text rather than the source. Link URLs, asterisks and pound signs are real characters until something renders them away. The word total barely moves, but the character total can run far higher than what a reader sees.

  • Strip the syntax first with our guide to turning Markdown into plain text, then paste the clean version into Word.
  • Draft in the online Markdown editor. It's free, runs in the browser with no account needed, and its status bar shows live word, character and line counts.
  • Paste a passage into the sentence counter, which runs in your browser. It counts words, characters and sentences in text you paste, but it doesn't open .docx files.

To move a finished draft across, see how to convert Markdown to Word. Going the other way is covered in converting Word to Markdown.

Short Answers About Word's Counter

The Microsoft Word counter has three layers: the live status bar, the Word Count dialog with its footnote checkbox, and the NumWords field. Select the body when references shouldn't count, and refresh any field before you submit. If your draft starts in Markdown, write it in the editor and watch its status bar counts as you go.