How to Insert a Footnote in Word: Windows, Mac, Web

November 11, 2026 · 9 min read

How to Insert a Footnote in Word (and Endnotes)

How to insert a footnote in Word comes down to two steps: click where the note mark belongs, then select Insert Footnote on the References tab. The shortcut is Ctrl+Alt+F on Windows and Cmd+Option+F on a Mac. Word adds a superscript number, jumps to the bottom of the page and waits for your note text.

This guide covers how to add footnotes in Word on Windows, Mac and the web, plus endnotes, numbering formats, converting between the two and deleting notes cleanly. If you write in Markdown first, the last section shows how your notes can arrive in Word as real footnotes.

How to Insert a Footnote in Word on Windows

Word for Microsoft 365, 2024, 2021, 2019 and 2016 all use the same steps, according to Microsoft's footnotes and endnotes training page.

  1. Click in the text where the reference mark should appear.
  2. Open the References tab and select Insert Footnote in the Footnotes group. Or press Ctrl+Alt+F.
  3. Word puts a superscript number at the cursor and moves you to the matching note at the bottom of the page.
  4. Type the note.
  5. To get back to where you were, double-click the reference mark at the start of the note.

Numbering is automatic. Add a footnote earlier in the document and every later one renumbers itself, so you never fix numbers by hand. Word formats the note text with its built-in Footnote Text style. Change that style once and every note in the document follows.

By default, a footnote sits at the bottom of the page that holds its reference mark. If you edit the text and the mark moves to the next page, the note moves with it. If a sentence cites two sources, our guide to two footnotes for one sentence shows where each mark goes.

How Do I Add an Endnote in Word?

You add an endnote in Word the same way, with a different button. Click where the mark should go, then select Insert Endnote on the References tab, or press Ctrl+Alt+D on Windows. Word adds the mark and moves you to the end of the document, where all endnotes collect in order.

Endnotes start at lowercase Roman numerals (i, ii, iii) by default, while footnotes use 1, 2, 3. That keeps the two sequences apart when a document has both. You can change either format in the dialog covered below, and you can place endnotes at the end of each section instead of the end of the document.

Which should you pick? We prefer footnotes for reports and papers read on screen, because the note sits right under the sentence and nobody scrolls to the back. Endnotes suit long documents with many or lengthy notes, such as books and theses, where page-bottom notes would crowd the text. Your style guide or publisher may decide for you.

Footnote Shortcuts and Steps for Word on Mac and the Web

If you need to make a footnote in Word on a Mac, the References tab has the same Insert Footnote and Insert Endnote buttons. You can also choose Insert, then Footnote from the menu bar, which opens the Footnote and Endnote dialog with all its options. Here are the keyboard shortcuts from Microsoft's Word keyboard shortcuts list:

ActionWindowsMac
Insert a footnoteCtrl+Alt+FCmd+Option+F
Insert an endnoteCtrl+Alt+DCmd+Option+E
Go to the next footnoteAlt+Shift+>Not listed
Go to the previous footnoteAlt+Shift+<Not listed

Microsoft's shortcut list has no footnote shortcut for Word for the web. Use the References tab and select Insert Footnote or Insert Endnote. From the keyboard, press Alt+Period and then S (or Alt+Windows logo key, then S) to reach the References tab. The numbering and conversion steps below are written for the desktop apps, so we open the file there for heavy note editing.

Changing Footnote Numbers, Symbols and the Starting Value

Every numbering option lives in the Footnote and Endnote dialog. On Windows, click the small arrow in the bottom-right corner of the Footnotes group on the References tab. On a Mac, choose Insert, then Footnote.

The dialog has these settings:

  • Location: footnotes at the bottom of the page or directly below the text; endnotes at the end of the section or the end of the document.
  • Number format: 1, 2, 3, letters, Roman numerals, or a symbol sequence that starts with the asterisk, dagger and double dagger (*, †, ‡).
  • Custom mark: type any character, or click Symbol to pick one, for a single note that shouldn't use the automatic number.
  • Start at: the first number in the sequence, useful when a chapter continues from another file.
  • Numbering: Continuous, Restart each section, or Restart each page.
  • Apply changes to: the whole document or only the current section.

Select Apply to change existing notes, or Insert to add a new note with these settings. Restart each page suits symbol marks, because the sequence stays short and the marks don't start doubling up.

Converting Footnotes to Endnotes in Word

Switching every note at once takes one dialog on Windows. Open the Footnote and Endnote dialog from the Footnotes group, select Convert, choose Convert all footnotes to endnotes, select OK and close the dialog. The same Convert box can also turn all endnotes into footnotes or swap the two types in one pass.

To convert a single note in Word for Windows, select Show Notes on the References tab, right-click the note text and choose Convert to Endnote. After any conversion, Word renumbers both sequences for you.

Deleting a Footnote and Removing the Separator Line

To delete a footnote, delete its reference mark in the body text, not the note at the bottom of the page. Select the superscript number and press Delete. Word removes the note and renumbers the rest. If you only clear the note text, you're left with an empty note and a number that still points at it. Endnotes work the same way.

To remove every note in a document, open Advanced Find and Replace: press Ctrl+H on Windows, or choose Find, then Advanced Find and Replace on a Mac. On the Replace tab, type ^f for footnotes or ^e for endnotes in Find what. Leave Replace with empty and select Replace All.

The short line above your footnotes is the footnote separator. To change or remove it, follow Microsoft's steps for deleting notes and the separator:

  1. On the View tab, select Draft.
  2. Double-click any note reference in the text to open the notes pane.
  3. Choose Footnote Separator from the Footnotes list.
  4. Select the line and delete it, or restyle it from the Home tab.
  5. Switch back to Print Layout on the View tab.

How Do I Add a Note Under a Table in Word?

A footnote inserted inside a table cell still goes to the bottom of the page, not under the table. That's fine for a single source note, but journals and reports often want table notes directly below the table.

For that layout, skip the footnote feature. Mark the cell with a letter or symbol in superscript (Ctrl+Shift+Plus sign on Windows). Then type the note as a normal paragraph right under the table, in a smaller font. If the table has a caption, keep the notes between the table and the next paragraph so they travel together. The trade-off is that Word won't renumber these marks for you.

Writing Footnotes in Markdown and Converting Them to Word

If you draft in Markdown, you write a footnote as a marker in the text and the note anywhere below it. The syntax is an extension rather than core Markdown, and our guide to Markdown footnote syntax covers which platforms support it.

Word stores notes apart from the body text.[^1]

[^1]: Microsoft Support, Insert footnotes and endnotes in Word.

Run pandoc notes.md -o notes.docx and Pandoc writes a .docx where that marker is a real, automatically numbered Word footnote. The Pandoc User's Guide on footnotes documents the syntax. In our test with Pandoc 3.8.2.1, every note arrived as a footnote. Use Convert in Word if you need endnotes. Our Markdown to Word guide compares the other conversion routes.

One limitation: our editor's preview doesn't render footnotes, so the marker shows as plain text there. Check the notes in the converted Word file, or on GitHub. If your notes are citations, the citation generator formats APA, MLA, Chicago, IEEE and Harvard references as Markdown with footnotes or a reference list. For when to use notes for referencing at all, see our Markdown citations guide.

That's how to insert a footnote in Word on Windows, Mac and the web: Insert Footnote on the References tab or Ctrl+Alt+F, with endnotes one button away. Use the Footnote and Endnote dialog for symbols and restarts, and delete the reference mark to remove a note. If you draft in Markdown, write your notes in the editor and let Pandoc turn them into Word footnotes.