How to Add a Line in Word: Horizontal, Vertical, Fill-In
November 11, 2026 · 9 min read
How to Add a Line in Word: Horizontal, Vertical, and Fill-In Lines
Here's how to add a line in Word the fast way: on an empty line, type three hyphens and press Enter, and Word draws a line across the page. Vertical lines, write-on lines and signature lines each need a different method. This guide matches every kind of line to the method that stays where you put it.
Which Kind of Line Do You Need in Word?
Word has several ways to put a line on the page, and each reacts differently when you edit the text around it. Start with what the line is for, because that decides how to put a line in Word:
- Divider across the page: the three-character shortcut.
- Line under a heading or between paragraphs: a bottom border.
- Vertical line: a shape, a side border or a line between columns.
- Blank line to write on: a tab with an underscore leader.
- Signature line: Add a Signature Line, or a fill-in line.
- Angled or decorative line: Insert > Shapes.
Two near misses. If you meant starting a new line of text, that's a line break, and this guide doesn't cover it. A line through your text is strikethrough, which lives in the Font group on the Home tab.
The Three-Character Shortcut for a Horizontal Line
This is the quickest method, and the one most people find by accident. Put the cursor on an empty line, type three of the characters below and press Enter. Word swaps them for a line that spans the page width, or the column in a multi-column layout.
| Type this, then press Enter | Line you get |
|---|---|
--- | Thin single line |
___ | Thick single line |
=== | Double line |
*** | Dotted line |
~~~ | Wavy line |
### | Triple line with a thicker middle |
Microsoft's horizontal line instructions say to type the characters on a line by themselves. The page shows the styles as a picture and covers Word for Windows, noting that Word for Mac and Word for the web may differ.
Changed your mind? Press Backspace straight after the line appears and Word puts the characters back. Microsoft describes the result as an empty paragraph with a bottom border, which is why you can't click the line to select it. To restyle it, click in the empty paragraph just above the line, open the Borders arrow on the Home tab and choose Borders and Shading.
Adding a Line with the Home Tab Borders Menu
The Borders button in the Paragraph group gives you more control than the shortcut. It applies to the paragraph your cursor is in, so the line stays attached to that text.
Under a heading or between paragraphs. Click in the paragraph, open the arrow next to Borders and choose Bottom Border. The line runs the full width of the paragraph. To separate two paragraphs, give the first a Bottom Border or the second a Top Border.
Graphic rule. The same menu has a Horizontal Line option. It inserts a separate line object instead of a border, and double-clicking it opens its formatting options, such as width and color.
Custom style. Borders and Shading, at the bottom of the menu, sets the style, color and width. Click the bottom edge in its Preview diagram to apply the line there only.
We prefer Bottom Border for anything tied to text, such as a rule under a section heading. It moves with the heading when you edit, and you can build it into a heading style so every heading gets the same line.
How Do You Draw a Vertical Line in Word?
Pick one of four methods, based on what the line has to stay next to.
- Shape. Go to Insert > Shapes and pick the straight line. Hold Shift while you drag, which Microsoft says keeps it perfectly vertical or horizontal.
- Paragraph border. Click in a paragraph, open the Borders arrow and choose Left Border or Right Border. The line grows as the paragraph does, which suits a pull quote.
- Line between columns. For text set in columns, open Layout > Columns > More Columns and tick Line between.
- Table. For side-by-side blocks, such as a two-part letterhead, insert a one-row, two-column table. Set No Border, then add back Inside Vertical Border only.
Only the shape can sit anywhere on the page. The other three are tied to text or layout, so they won't drift.
Drawing Lines with Insert > Shapes
Shapes give you any length, angle or style, including arrows and curves. Microsoft's guide to drawing a line in Word covers the basics. Drag to draw, then keep the line selected and open Shape Format > Shape Outline to set its color, weight and dashes or arrowheads.
The catch is placement, and it's the real limitation of this method. A drawn line floats over the page instead of sitting in the text. Add a paragraph above it and the words move down while the line stays put. It can end up across the wrong sentence or on the wrong page.
To limit the drift, select the line, click the Layout Options button beside it and choose In Line with Text. We still keep Shapes for diagrams and decoration, and use borders for anything that has to follow the text.
How to Add a Line in Word to Write On
Forms and worksheets need blank lines people fill in. A row of underscores looks fine until someone types on it. Their words push the underscores along until the line wraps. Worse, a line of nothing but underscores followed by Enter triggers the border shortcut from earlier.
A tab stop with an underscore leader gives you a line of fixed length:
- Click the small launcher arrow in the corner of the Paragraph group on the Home tab, then click Tabs.
- Type a position near the right margin, such as 6.5 inches on a Letter page with 1-inch margins. Choose Right alignment.
- Under Leader, pick the underscore option, then click Set and OK.
- Type a label such as Name: and press Tab.
Word fills the gap from the label to the tab stop with a solid line. Press Enter and repeat for more lines, because the new paragraph keeps the same tab stop. That's how to insert lines in Word that always end at the same point, however much someone writes.
For a long form, a table is tidier. Use one row per field, remove all borders, then give only the answer cells a bottom border. If the form needs tick boxes too, see how to insert a checkbox in Word.
Adding a Signature Line in Word
Desktop Word has a built-in signature line. Put the cursor where it belongs, open the Insert tab and select Add a Signature Line in the Text group. In Signature Setup, type the suggested signer's name and title, and tick Show sign date in signature line if you want the date.
Microsoft's signature line instructions describe this for the desktop apps. Some versions label the button Signature Line. The result can carry a digital signature, and a digitally signed document becomes read-only.
For a page you'll print and sign by hand, that's more than you need. Use the tab leader from the previous section, then type the signer's name on the line below. Do the same if your copy of Word doesn't show the command.
How to Remove an Automatic Line in Word
The line Word added after you typed three hyphens is the one people struggle to delete. You can't click it, because it isn't an object. It's a border on the paragraph above it.
- Click in the paragraph just above the line. If the shortcut made it, that's the empty paragraph where you typed the characters.
- On the Home tab, open the arrow next to Borders and choose No Border.
Not sure which paragraph owns the border? Select the paragraphs on both sides of the line and choose No Border.
To stop Word doing it again on Windows, go to File > Options > Proofing > AutoCorrect Options. On the AutoFormat As You Type tab, clear Border Lines and select OK. A Horizontal Line graphic or drawn shape is simpler: click it and press Delete. The short line above footnotes is the footnote separator, and our guide to footnotes in Word shows how to remove it.
Dividers in Markdown Drafts Before They Reach Word
In Markdown, a line containing only three hyphens, with a blank line above it, is a divider, which the CommonMark spec calls a thematic break. Our guide to Markdown horizontal lines covers the syntax.
Notes from Monday's meeting.
---
Action items for Tuesday.
This renders as two paragraphs with a rule between them. In our Markdown editor, the toolbar's Horizontal Rule button inserts one for you. When the draft is ready, the Markdown to Word converter turns it into a .docx, and our walkthrough on converting Markdown to Word compares other routes. Then add or adjust lines in Word. Going the other way? See Word to Markdown.
Now you know how to add a line in Word for each job. Type three characters for a quick divider, use a bottom border for lines tied to text, and draw Shapes for vertical or decorative lines. A tab leader handles write-on lines, and Add a Signature Line covers contracts. Match the method to the line's purpose and it won't wander when the text changes. Drafting in Markdown first? Try our free editor in your browser.